Please choose your application:
Contact us to discuss your application with an experienced Selas engineer.
Results for All Applications
Features a new 2" 2-tube arrangement to improve heat recovery time and reduce waste in baking and other critical applications. Replaces the older 1.5" black pipe models for higher turndown.
A direct replacement for any BP/APV Turkington pipe burner. Used primarily in bakeries and where an oven's heat profile needs to be modified.
Can be utilized anywhere direct flame impingement is required, such as in bakery, wire, glass and plastics industries.
Twice as heavy as our standard Schedule 80 pipe burners.
At 60,000 BTUs per inch, these direct impingement linear burners are the most powerful in the industry.
When you require maximum linear heat, these impingement burners are the answer.
Designed for limited space applications requiring concentrated heat patterns, they provide a wide range of flexibility with respect to capacities, flame patterns and sizes.
The ideal means of providing balanced heating conditions in pipe ribbon burner installations, under adverse circumstances.
Specially designed heating units for use where a narrow, uniform sheet or ribbon of flame is desired.
Pyroline Burners are cast iron, drilled port continuous line burners with alloy side rails. Midget Pyroline Burners are low capacity, blast, line type units.
Designed for process temperatures up to 2500°F (1371°C), and incorporates two-stage combustion for low NOx.
A pre-assembled and factory calibrated package burner, the SuperflameTM Pak Burner saves money and labor on installation and tuning and virtually eliminates routine calibration.
Used primarily where a high recirculation rate of the products of combustion is required.
Nozzle mixing oil or gas units designed for up to 350% excess air or on ratio firing.
Nozzle-mixing high velocity burner which will burn most gaseous fuels as well as light distillate oils.
AR Series burners are infrared metal-fiber burners with high radiance and all-metal construction and premix design. The Apollo-Ray is available in two sizes.
7-inch size with either cast iron or special alloy components. Employs an air-gas mixture impinging directly on the finned refractory surface to produce a high-density flux of maximum radiance.
Used in a wide range of industrial applications such as battery manufacturing, pre-drying, paint flow coating, resin curing, and roofing.
6-inch gas impingement types which generate intense, concentrated radiation. They are typically used in industrial applications (curing coatings on steel) and food applications (baking).
These burners can be installed in a process plant recirculation system where it is not possible to construct a combustion chamber and install a conventional type of burner assembly.
Designed to offer the oven designer, process engineer or user a complete pre-wired, pre-piped burner package.
Air heating burners that direct combustion air across distribution air foils to heat fresh or recirculated air in ovens, air ducts, and other applications.
Gas burners that are pre-packaged fan assisted units designed to suit virtually all types of low temperature gas fired application.
Pyronics High-Momentum Burners (HMB) are designed for process temperatures up to 2700°F Designed for process temperatures up to 2700 degrees F.
Nozzle mixing types designed for 800% excess air for single tunnel cool flame applications.
The NM burner features short flames, wide turndown ranges and very stable combustion.
Features a unique cup-like design that allows combustion air and fuel gas to quickly and thoroughly mix at the nozzle.
Atmospheric gas burners designed for high turndown ranges on all types of combustion chambers or furnaces operating under a negative pressure.
Ideal for small space applications requiring concentrated heat patterns.
Will burn any standard fuel gas at mixture pressures ranging from 0.1 to 60 WC.
Constructed like refractory-lined furnaces in miniature and are capable of heating up to 25,000 BTU/hr/inch.
Increase the effectiveness of selective open heating by releasing high heat to very specific areas of a workpiece.
Designed to produce a piloted spear-like heating flame allowing wide turn-down and offering flexibility, advantageous performance and long life.
Combine positive flame geometry with maximum heat release and low turndown.
Blast Tips for tunnel nozzle mix burners will provide extremely stable operation with air/fuel ratios ranging from 70% to 100% aeration.
Sealed-in tunnel burners with superior flame retention and combustion characteristics.
With a turndown of 20:1 and high speed radiant heat transfer, allows the position of the burner tip to change as the pressure by the fuel mixture changes.
Comprised of two burner types (above and below 2000°F/1093°C), each furnace wall burner is manufactured in a high and low capacity range. Parts are ceramic or alloy.
Designed for mounting into vertical refractory walls or panels with 4-1/2" (114mm) thick wall construction. All critical metallic parts are fabricated of heat resistant alloy steel.
Blast Tips are compact premix nozzles designed for stable handling of high pressure fuel mixtures in small-volume applications where a jet of flame is appropriate.