Please choose your application:
Contact us to discuss your application with an experienced Selas engineer.
Results for All Applications
Designed for process temperatures up to 2500°F (1371°C), and incorporates two-stage combustion for low NOx.
Used primarily where a high recirculation rate of the products of combustion is required.
Nozzle mixing oil or gas units designed for up to 350% excess air or on ratio firing.
Nozzle-mixing high velocity burner which will burn most gaseous fuels as well as light distillate oils.
Red-Ray’s MR-12 infrared burner has a durable fine porosity metal alloy refractory grid that has excellent resistance to impact, thermal shock and water damage.
AR Series burners are infrared metal-fiber burners with high radiance and all-metal construction and premix design. The Apollo-Ray is available in two sizes.
7-inch size with either cast iron or special alloy components. Employs an air-gas mixture impinging directly on the finned refractory surface to produce a high-density flux of maximum radiance.
Used in a wide range of industrial applications such as battery manufacturing, pre-drying, paint flow coating, resin curing, and roofing.
6-inch gas impingement types which generate intense, concentrated radiation. They are typically used in industrial applications (curing coatings on steel) and food applications (baking).
Widely used in tortilla chip ovens and many industrial ovens (ie. powder coating) requiring high heat flux density.
Patent pending design provides the highest efficiencies across all inputs, excellent heat flux and unmatched tube temperature uniformity.
These burners can be installed in a process plant recirculation system where it is not possible to construct a combustion chamber and install a conventional type of burner assembly.
Designed to offer the oven designer, process engineer or user a complete pre-wired, pre-piped burner package.
Air heating burners that direct combustion air across distribution air foils to heat fresh or recirculated air in ovens, air ducts, and other applications.
Compact, sealed nozzle-mix units designed to operate in radiant tubes with maximum combustion efficiency over varying operating conditions.
Radiant tube burners are recuperative style and available as single end (SER) or direct fired (UHF).
Pyronics High-Momentum Burners (HMB) are designed for process temperatures up to 2700°F Designed for process temperatures up to 2700 degrees F.
The swirling air stream produces a negative vortex at the mouth of the refractory block.
Nozzle mixing types designed for 800% excess air for single tunnel cool flame applications.
The NM burner features short flames, wide turndown ranges and very stable combustion.
Features a unique cup-like design that allows combustion air and fuel gas to quickly and thoroughly mix at the nozzle.
Constructed like refractory-lined furnaces in miniature and are capable of heating up to 25,000 BTU/hr/inch.
Blast Tips for tunnel nozzle mix burners will provide extremely stable operation with air/fuel ratios ranging from 70% to 100% aeration.
Blast Tips are compact premix nozzles designed for stable handling of high pressure fuel mixtures in small-volume applications where a jet of flame is appropriate.
Provide close coupling of radiant heat sources, and are ideal for light-duty heating applications.
Offer controlled radiant heat to improve product quality and enhance productivity. Available in a range of sizes, cup contours and housings, and mount in any position.